Water heaters sealed combustion chamber

Security SX080

Certificazione CE
Made in Italy
Dimensione M
Fascia Energetica A

The new Security SX range has been designed in compliance with the new Low NOx ErP 2018 regulation.

Security SX is a water heater for the production of storage water from 80 to 800 liters depending on the model.

All the devices produced in our factory have always been checked and tested.

 

The Security SX range meets the requirements of the EN89: 2015 standard and the following European directives:

  • 2016/426 – Gas Appliance Regulation (GAR)
  • 2014/35/CE - Low Voltage Directive (LVD)
  • 2014/30/CE - Electromagnetic Compatibility (EMC)
Request Info

Info request module

Please, fill the module on any of its fields.


Overview

  • room-sealed combustion chamber
  • fan-assisted flue
  • glass-lined tank (with magnesium anode protection against corrosion)
  • automatic electronic ignition with flame detection by ionization
  • adjustable thermostat and overheat safety thermostat
  • multigas stainless steel burner (NG or propane)
  • high efficiency
  • wall hung installation
  • adjustable flue hood for an easy flue installation
  • several flue options (horizontal or vertical concentric, single wall)

Components

  1. Flue hood
  2. Wall hung installation
  3. Control box
  4. Instrument control panel (thermometer, adjustable thermostat, ON-OFF switch, lock out light + reset button)
  5. Hydraulic safety group EN 1487
  6. Flange for inspection and calcium cleaning and magnesium anode for corrosion protection
  7. Plate tank of first choice (thickness 2.5) with internal treatment of double glazing

Dimensions

1⁄2” M cold water inlet
1⁄2” M hot water outlet
3/8” gas inlet
Ø 38/60 flue outlet


A  1073
B  918
C  877
D  688

Specifications

Nominal Input (Gross) kW 5,0
Nominal Output (Net) kW 4,5
efficiency % 91%
storage capacity lt 75
empty weight kg 52
filled weight kg 127
Nox Emission ppm 15
Nox Emission mg/kWh 26
sound power level dB(A) 45
energy efficiency class -- A
load profile -- M
annual electricity consumption AEC  kWh 8
annual fuel consumption AFC  GJ 7
recovery rate - ΔT=25°C * l/h 157
recovery rate - ΔT=50°C * l/h 78
heating-up-time - ΔT=25°C ** min 29
heating-up-time - ΔT=50°C ** min 58
draw-off capacity immediately - ΔT=25° * l 180
draw-off capacity immediately - ΔT=50° * l 90
gas consumption - Natural gas (G20) mc/h 0,52
gas consumption - Propane (G31) kg/h 0,39
power supply V/Hz/w 230V / 50Hz / 26w
max working pressure kPa (bar) 600 (6)
dimensions mm (LxPxH) 460 x 477 x 1073
packaging (1 piece) kg
cm (LxPxH)
58
530 x 530 x 1120

* T storage 70°C - cold 10°C

Flue kits

The boiler is supplied without an exhaust kit. The following table shows available kits for this appliance.
Use only the original kits supplied by the manufacturer (to be purchased separately according to the type of exhaust intended).

ASKITSO

Ø38/60 Horizontal coaxial flue kit
Type C1

Contents

  • Ø38 x 40 clamp with seal
  • Ø60 x 75 clamp with seal
  • Crownlock washer
  • Ø60 x 75 seal
  • Ø38 x 40 seal
  • Ø60 wall cover
  • Ø40 terminal
  • Ø38 x 1000 M/M Pipe
  • Ø60 x 930 M/M Pipe

Dimensions and limits of use

Accessories and extensions

PhotoCodeDescription
A.S.DC604 coaxial elbow with clamp and gasket Ø38/60 - 45°
A.S.PC100 coaxial pipe with clamp and gasket Ø38/60 L= 1000
A.S.PC50 coaxial pipe with clamp and gasket Ø38/60 L= 500
A.S.ROS60 Ø60 steel wall cover
A.S.TS38 Ø38 flue terminal

ASKITSS

Ø38/60 Horizontal single wall flue kit
Type C1, C4

Contents

  • Ø38 - 90° M/M bend
  • Ø38 x 40 clamp
  • Ø60 x 45 clamp
  • Ø38 x 40 seal
  • Ø60 x 9,5 seal
  • Ø60/60 h=240 T element
  • Ø60/38 adapter
  • Ø38 wall cover
  • Ø60 wall cover
  • Ø60 terminal
  • Ø38 x 1000 M/M Pipe
  • Ø60 x 1000 M/F Pipe

Dimensions and limits of use

Accessories and extensions

PhotoCodeDescription
A.S.CV384 Ø38 - 45° elbow with clamp and gasket
A.S.CV389 Ø38 - 90° elbow with clamp and gasket
A.S.CV604 Ø60 - 45° elbow with clamp and gasket
A.S.CV609 Ø60 - 90° elbow with clamp and gasket
A.S.FG384 Ø38 H=40 clamp with seal
A.S.FG604 Ø60 H=45 clamp with seal
A.S.FG607 Ø60 H=75 clamp with seal
A.S.PR38 Ø38 L=1000 extension pipe with clamp and gasket
A.S.PR385 Ø38 L=500 extension pipe with clamp and gasket
A.S.PR60 Ø60 L=1000 extension pipe with socket
A.S.PR605 Ø60 L=500 extension pipe with socket
A.S.RI63 Ø60 - Ø38 reducer
A.S.RI86 Ø80 - Ø60 reducer
A.S.ROS38 Ø38 steel wall cover
A.S.ROS60 Ø60 steel wall cover
A.S.TA60 Ø60 air terminal
A.S.TS38 Ø38 flue terminal
A.S.TS60 Ø60 flue terminal

ASKITSV

Ø38/60 Vertical coaxial flue kit
Type C3

Contents

  • Ø60/Ø38 elbow
  • Ø38 x 40 clamp
  • Ø60 x 45 clamp
  • Ø38 x 40 seal
  • Ø100F / Ø80M REDUCING ADAPTER
  • Ø60/38 REDUCING ADAPTER
  • Ø80F / Ø60M REDUCING ADAPTER
  • Ø60/100 terminal
  • Ø38 X 250 M/M pipe

Dimensions and limits of use

Download

Web design by Tecnichemiste